ST890CDR Overview

Tape & Reel (TR) is how it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It belongs to the family ST890.A total of 8 terminations have been found in it.It is necessary to use the 8 pins in order to operate the LED driver.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.2A.Using a voltage of 3V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 8 pins.It has 90mOhm resistance.This case results in a 1.2A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The power supply of the part is 3/5V.In order to maximize efficiency, the supply voltage should be set at 5.5V.Input voltage is limited to 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.This system has a maximum current requirement of 13mA.

ST890CDR Features

Supplied from 3V
Resistance of 90mOhm

ST890CDR Applications

There are a lot of STMicroelectronics ST890CDR Power Switches ICs applications.

• Wireless Headsets
• Hot-Swap Systems
• HDD, SSD
• Solid State Drivers
• Wearable Devices
• Low Voltage I/O System Power
• Storage (HDDs, SSDs)
• Various applications equipped with buttons
• Portable Video Game Players
• USB3.1 Power Delivery