STAP16DPS05XTTR Overview

24-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space on the board. As part of the design of this LED driver, there are 16 outputs that have been used.Surface Mount is used for mounting.When it emerges as a Linear, it performs extremely well and is highly reliable.-40°C~125°C TJ is a valid operating temperature for the led driver.There are considerable benefits for Backlight.There are 24 pins on the base of this LED driver.The mount is on its way to Surface Mount.This LED driver can be found under the base part number STAP16.It's acceptable for the voltage to be 5.5V.The output voltage is 20V.A minimal input voltage of 3V is required for it to operate.When the maximum supply current is allowed, it reaches 5.5V.Whenever the supply current is lower than 11mA, it can provide high efficiency.There is no current available to supply to the load.This electronic component can fully perform its functions when the switching frequency is kept at 30MHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 100mA.It is important that the output voltage does not exceed 20V.

STAP16DPS05XTTR Features

Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Switching frequency of 30MHz

STAP16DPS05XTTR Applications

There are a lot of STMicroelectronics STAP16DPS05XTTR LED Driver ICs applications.

• Replacement lamps
• LED backlight driver for LCD displays for Tablets and Note PCs
• Stage Lighting and Signage
• Stage and Studio lighting
• Linear fluorescent
• Medical surgery lighting
• Portable lighting
• LED backlight driver for LCD displays for portable equipment
• A- lamps
• General lighting