Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. 10 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 10 pins. Multiplexers built on a SPDT switching circuit are built. Try searching for the analog switch ic with STG6684 if you are looking for variants. As far as internal resistance is concerned, it has 2.9Ohm. To find out what the functions of 10 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 4.3V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.65V. This digital switch can be operated with a current of 50nA. This analogue multiplexer requires a voltage of 1.65V~4.3V when it drains from a single voltage supply. Put voltage above 50nA on the multiplexer to cause damage. The 2 inputs need to be operated in order to work. An output of 4 is provided by the digital multiplexer.