STLA02PUR Overview

It saves board space with the 6-WFDFN Exposed Pad package. This LED driver has 1 outputs.The led light driver is mounted using Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.If the led driver ic is set to -40°C~85°C TA, it will work normally.As a result, Backlight is likely to benefit greatly.2MHz is the frequency in which it operates.6 terminations are used in its operation.The LED light driver is configured with a base of 0 pins.If the voltage supply is below 2.5V, undetermined failures may occur.The device has been mounted on the Surface Mount.The LED driver is available under the part number STLA02.An acceptable maximum value for the supply voltage is 18V.There is 27V voltage output from this device.In addition, it can also be categorized into Display Drivers based on its characteristics.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 2mA.20mA is the maximum amount of current that can be supplied to the load.

STLA02PUR Features

Available in the 6-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 3V

STLA02PUR Applications

There are a lot of STMicroelectronics STLA02PUR LED Driver ICs applications.

• Flicker-free LED Lighting using R1580N
• Medical surgery lighting
• Stage and Studio lighting
• White LED Backlight for portable equipment
• Linear fluorescent
• Refrigeration lighting
• LED Lightings for Inspection Devices
• LED headlights
• Scanners and Handy Terminals
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices