STM1061N28WX6F Overview

This power management consists of 3 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 3.6μA. If you want to search for similar IC managements of this manufacturer, you can always refer to STM1061, which is the base power ics number. Voltage supervisor can work with a supply temperature of 3.6μA at the most.

STM1061N28WX6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current

STM1061N28WX6F Applications

There are a lot of STMicroelectronics STM1061N28WX6F Voltage Supervisors applications.

• Stable power system
• Cloud computing
• Dash board
• Precision measurement
• Power communication system
• Radio
• Battery cars
• Battery-powered equipment
• Transformer load monitoring equipment
• Detection of phase loss