STM1061N38WX6F Overview

There are 3 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 3 pins on IC management. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 1.1μA. A similar IC managements number of the manufacturer can always be found by using STM1061, the base power ics number. The maximum supply temperature is 3.6μA.

STM1061N38WX6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
1.1μA operating supply current

STM1061N38WX6F Applications

There are a lot of STMicroelectronics STM1061N38WX6F Voltage Supervisors applications.

• Detection of phase loss
• Radar
• Leakage current detection
• Urban rail transit weak current power monitoring
• Radio
• Fire equipment power monitoring system
• Magnetic resonance imaging
• Precision measurement
• Telecommunications equipment
• Medical-specific isolation transformer