STM1403CTNQ6F Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes 16-VFQFN Exposed Pad functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.3V supply voltage, the power management conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. 16 pins are present in total in this power management. There are 16 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.2V. The maximum supply voltage (Vsup) is not to exceed 3.6V volts in this IC management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 45μA is the recommended value. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. For similar manage ics search of the manufacturer, you can always refer to STM1403, the base PMIC number. The maximum supply temperature that PMIC chip can work with is 45μA.
STM1403CTNQ6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.2V
45μA operating supply current
STM1403CTNQ6F Applications
There are a lot of STMicroelectronics STM1403CTNQ6F Voltage Supervisors applications.
- Microprocessor system
- Solar power charger
- Refrigeration
- Insulation fault location system
- Rechargeable batteries
- Power distribution systems of infant care room
- Electronics installed in the vehicle
- Detection of phase imbalance
- Utility meter
- Analog circuit
