STM6601AQ2BDM6F Overview

As you can see, this power management is mounted through 12 terminals. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. In this IC management you will find 12-WFDFN functions for you to refer to. There are many benefits that this IC power shares with other Smart ON/OFF Controller products as well. IC management is specified that the package peak reflow temperature should be 260. In a 2V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 12 pins on the board. This power management has 12 pins. There should be a minimum voltage supply (Vsup) of 1.65V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 6μA volt supply current. It is always advisable to use STM6601, the base supervisor number, when searching for similar PMICs from the manufacturer. As you can see, this IC power comes from the well-known Smart Reset? series of products.

STM6601AQ2BDM6F Features

Smart ON/OFF Controller type
Minimum supply voltage of 1.65V
6μA operating supply current

STM6601AQ2BDM6F Applications

There are a lot of STMicroelectronics STM6601AQ2BDM6F Voltage Supervisors applications.

• Radar
• FPGA design
• Urban rail transit weak current power monitoring
• Efficient information transmission
• Microprocessor system
• Battery cars
• Digitally controlled LDO regulators circuit
• Power distribution systems of operating room
• Battery-powered equipment
• Stable power system