STM6717SDWY6F Overview

A total of 5 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a SC-74A, SOT-753 package. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 3.3V. IC management is possible to find a succession of 2 voltages that have been checked. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. 5 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 35μA. It is always advisable to use STM6717, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 35μA.

STM6717SDWY6F Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current

STM6717SDWY6F Applications

There are a lot of STMicroelectronics STM6717SDWY6F Voltage Supervisors applications.

• Consumer electronics
• Analog circuit
• Microcontroller system
• Leakage protection
• Microprocessor system
• Power distribution systems of operating room
• Digitally controlled LDO regulators circuit
• Radio
• Set top box
• Power distribution systems of ICU