STM6719TGWB6F Overview

There are 6 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SOT-23-6 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. During the reflow process, a peak temperature of 260 is specified for the package. In a 3.3V supply voltage, the power management conducts. In a 3 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 6. This power management system has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 35μA. For similar manage ics search of the manufacturer, you can always refer to STM6719, the base PMIC number. The power management can work with a maximum supply temperature of 35μA. A IC management with this architecture has 1 outputs.

STM6719TGWB6F Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current

STM6719TGWB6F Applications

There are a lot of STMicroelectronics STM6719TGWB6F Voltage Supervisors applications.

• Smartphones
• DVR
• Stable power system
• Low voltage/high power - AI, GPU
• Analog circuit
• Computer applications
• Unattended substation automation
• Household appliances
• Medical-specific isolation transformer
• Detection of phase sequence