STM6823SWY6F Overview

A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 5 pins in it. 5 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 12μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to STM6823, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 12μA.

STM6823SWY6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current

STM6823SWY6F Applications

There are a lot of STMicroelectronics STM6823SWY6F Voltage Supervisors applications.

• Medical-specific isolation transformer
• Transformer load monitoring equipment
• Electronics installed in the vehicle
• Smart meter
• Battery-powered equipment
• Leakage current detection
• Stable power system
• Telecommunications equipment
• Radio
• emergency room