STM6904SYEDS6F Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 4 channels. To assist you, this PMIC includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. There is a voltage supply of 4 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 8. There are 8 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 10μA. You can always use STM6904, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 14μA can be used with this power management.

STM6904SYEDS6F Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
10μA operating supply current

STM6904SYEDS6F Applications

There are a lot of STMicroelectronics STM6904SYEDS6F Voltage Supervisors applications.

• Power distribution systems of CCU
• Military electronics
• Power distribution systems of infant care room
• Battery cars
• Utility meter
• Precision measurement
• Analog circuit
• Power communication system
• Electric heating appliances
• Consumer electronics