STM705DS6E Overview

This power management consists of 8 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 5V-voltage supply. IC management conducts in a 1-voltage supply. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 8 pins on the board. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. You can always use STM705, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 60μA.

STM705DS6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM705DS6E Applications

There are a lot of STMicroelectronics STM705DS6E Voltage Supervisors applications.

• Power distribution systems of ICU
• Sensitive sensors
• Rechargeable batteries
• Medical-specific isolation transformer
• Battery-powered equipment
• Consumer electronics
• WiFi router
• Multi-voltage system
• Transformer load monitoring equipment
• Power distribution systems of operating room