STM707DS6F Overview

A total of 8 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. A total of 8 pins are located on this power management. Pin count of the power management is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 60μA for the power management. A similar IC managements number of the manufacturer can always be found by using STM707, the base power ics number. Voltage supervisor can work with a supply temperature of 60μA at the most.

STM707DS6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM707DS6F Applications

There are a lot of STMicroelectronics STM707DS6F Voltage Supervisors applications.

• Satellite navigation
• Dash board
• Unattended substation automation
• Leakage current detection
• Low voltage/high power - AI, GPU
• Medical-specific isolation transformer
• Computer applications
• Efficient information transmission
• Medical-specific insulation monitor
• Kitchen appliances