STM708M6E Overview

It is mounted through 8 terminals on the power management. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 60μA. It is always advisable to use STM708, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 60μA.

STM708M6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM708M6E Applications

There are a lot of STMicroelectronics STM708M6E Voltage Supervisors applications.

• FPGA design
• Insulation fault location system
• Radar
• Medical-specific isolation transformer
• Electrical fire monitoring system
• Important electronics for automotive safety
• Household appliances
• Rechargeable batteries
• Power distribution systems of infant care room
• Detection of phase imbalance