STM708TM6F Overview

It is mounted through 8 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 8. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to STM708, which is the base power ics number. The power management must be powered by 3.3/5V volts to function properly. Voltage supervisor can work with a supply temperature of 60μA at the most.

STM708TM6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM708TM6F Applications

There are a lot of STMicroelectronics STM708TM6F Voltage Supervisors applications.

• Important electronics for automotive safety
• Power communication system
• Leakage current detection
• Functional modules
• DVR
• Stable power system
• Dash board
• DSP
• Unattended substation automation
• Display equipment