STM795RM6E Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. In terms of packaging, power management follows the Tube model. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.6V. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. 8 pins are present in total in this power management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The power management's supply current is 60μA. It is always advisable to use STM795, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 3/5V watts is required for the operation of this power management. The power management can work with a maximum supply temperature of 60μA.

STM795RM6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM795RM6E Applications

There are a lot of STMicroelectronics STM795RM6E Voltage Supervisors applications.

• FPGA design
• Battery cars
• Digitally controlled LDO regulators circuit
• Detection of phase sequence
• Electrical fire monitoring system
• Microprocessor system
• Sensitive sensors
• External alarm
• Unattended substation automation
• Fire equipment power monitoring system