STM804SM6F Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.6V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. This power management has 8 pins. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 60μA for the power management. You can always use STM804, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 3.3/5V volts of power. The maximum supply temperature that PMIC chip can work with is 60μA.

STM804SM6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM804SM6F Applications

There are a lot of STMicroelectronics STM804SM6F Voltage Supervisors applications.

• Important electronics for automotive safety
• emergency room
• Functional modules
• Solar power charger
• Unattended substation automation
• DSP
• Detection of phase imbalance
• Kitchen appliances
• Power distribution systems of CCU
• Rechargeable batteries