STM805LM6E Overview
As you can see, this power management is mounted through 8 terminals. This power ic is packaged in a way that looks like a Tube. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. This power management has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 60μA. If you want to search for similar IC managements of this manufacturer, you can always refer to STM805, which is the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. At the most, voltage supervisor can work with a supply temperature of 60μA.
STM805LM6E Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM805LM6E Applications
There are a lot of STMicroelectronics STM805LM6E Voltage Supervisors applications.
- Power distribution systems of infant care room
- Battery cars
- Important electronics for automotive protection
- Detection of phase sequence
- Automotive power systems
- Analog circuit
- FPGA design
- Set top box
- Electronics installed in the vehicle
- Detection of phase imbalance
