STM805TM6E Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 3.6V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The power management's supply current is 60μA. It is always advisable to use STM805, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly. At most, voltage supervisor can operate at a supply temperature of 60μA.

STM805TM6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM805TM6E Applications

There are a lot of STMicroelectronics STM805TM6E Voltage Supervisors applications.

• Power distribution systems of ICU
• Cloud computing
• Consumer electronics
• Smartphones
• Detection of phase loss
• Data storage applications
• Fire equipment power monitoring system
• Detection of phase imbalance
• Transformer load monitoring equipment
• Radar