STM809TWX6F Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.3V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 3 pins that are attached to IC management. There are 3 pins on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by STM809. At most, voltage supervisor can operate at a supply temperature of 15μA.

STM809TWX6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current

STM809TWX6F Applications

There are a lot of STMicroelectronics STM809TWX6F Voltage Supervisors applications.

• Electric heating appliances
• Important electronics for automotive protection
• DC stabilized power supply module
• Military electronics
• Military communications
• Utility meter
• Satellite navigation
• Electronics installed in the vehicle
• Detection of phase loss
• Network equipment