STM812MW16F Overview

Power management is mounted through 4 terminals. Packaging is in the form of a Cut Tape (CT). In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes TO-253-4, TO-253AA functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.6V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. There are a total of 4 pins on power management. 4 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. It is always advisable to use STM812, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 15μA.

STM812MW16F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current

STM812MW16F Applications

There are a lot of STMicroelectronics STM812MW16F Voltage Supervisors applications.

• Battery-powered equipment
• Radio
• DSP
• Digitally controlled LDO regulators circuit
• Refrigeration
• Satellite navigation
• Power communication system
• Consumer electronics
• Linux and server computing
• Magnetic resonance imaging