STM813LDS6E Overview

It is mounted through 8 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. A supply voltage of 5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 60μA is the recommended value. It is always advisable to use STM813, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 60μA.

STM813LDS6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM813LDS6E Applications

There are a lot of STMicroelectronics STM813LDS6E Voltage Supervisors applications.

• Battery cars
• Functional modules
• Rechargeable batteries
• DSP
• Electrical fire monitoring system
• Radar
• Detection of phase sequence
• Military electronics
• Efficient information transmission
• Battery-powered equipment