STP16C596B1R Overview

There is a 24-DIP (0.300, 7.62mm) package on the board that is used to save space. For the design of these LED drivers, 16 outputs are used.It is mounted using Through Hole.With high efficiency, it appears as a Linear.It is possible for the led driver ic to operate normally at -40°C~125°C TA.A frequency of 25MHz is used to operate it.The system operates with a termination of 0.The LED light driver is configured with a base of 0 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 4.5V.It is estimated that there are 5 segments.This is mounted by Through Hole.It is under the base part number STP16C that the LED driver can be found.A maximum supply voltage of 5.5V is acceptable.It produces a voltage of 16V volts.24 pins are used on the device.According to its characteristics, it is also categorized into Display Drivers.To meet high efficiency standards, it works with a voltage of 4.5V.When the maximum supply current is below 14.1mA, the device can deliver high efficiency.

STP16C596B1R Features

Available in the 24-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 25MHz
Supply voltage of 5V

STP16C596B1R Applications

There are a lot of STMicroelectronics STP16C596B1R LED Driver ICs applications.

• Stage and Studio lighting
• General lighting
• Flicker-free LED Lighting using R1580N
• LED backlight driver for LCD displays for Tablets and Note PCs
• OLED power supply for portable equipment
• White LED Backlight for portable equipment
• Gallery lighting
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Stage Lighting and Signage
• Portable lighting