STP16CL596TTR Overview

There is also a 24-TSSOP (0.173, 4.40mm Width) package that is used to save space on the board. LED drivers use 16 outputs for their design.Mounting is done according to the Surface Mount method.In this case, it emerges as a Linear with a high efficiency.This LED driver can be operated at a temperature of -40°C~125°C TA. Based on the frequency of 25MHz, it operates on the basis of a pulse.There are 24 terminations associated with it.Its configuration is based on 24 pins.It is likely that undetermined failures will occur if the voltage supply is less than 3V.There are 16 segments in it.The device has been mounted on the Surface Mount.It is under the base part number STP16C that the LED driver can be found.It produces a voltage of 16V volts.24 pins are used on the device.In addition, its characteristics are classified into Display Drivers.When the maximum supply current is below 14.1mA, the device can deliver high efficiency.It is necessary to power systems with a voltage of 3.6V

STP16CL596TTR Features

Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 25MHz
Supply voltage of 3.3V
Operating with the supply voltage of 3.6V

STP16CL596TTR Applications

There are a lot of STMicroelectronics STP16CL596TTR LED Driver ICs applications.

• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Architectural lighting
• A- lamps
• Portable lighting
• Auxiliary lights for on-vehicle cameras
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Museum lighting
• Scanners and Handy Terminals
• Constant Voltage Power Source for portable equipment
• Stage Lighting and Signage