STP16CP05B1R Overview
There is a 24-DIP (0.300, 7.62mm) package on the board that is used to save space. LED drivers are designed with 16 outputs.Through Hole is used for mounting.This emerges as a Linear with high efficiency and reliability.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.30MHz is the frequency in which it operates.In this case, the terminations are set to 24.A configuration of this chip is made up of 24 pins.If the voltage supply is lower than 3V, undetermined failures may occur.The segment count is 16.The mount is on its way to Through Hole.There is a base part number STP16C for this LED driver.It is acceptable for the voltage to be 5.5V.The output voltage of the device is 20V.This device contains 24 pins.The Display Drivers is also assigned based on its characteristics.A minimum supply voltage of 3V is required to meet the highest efficiency standards.
STP16CP05B1R Features
Available in the 24-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16CP05B1R Applications
There are a lot of STMicroelectronics STP16CP05B1R LED Driver ICs applications.
- Stage and Studio lighting
- Panel lighting
- Museum lighting
- Down lighting
- LED Lighting PFCs, Linear Dimmable
- Dimmable LED for vehicle interiors
- Stage Lighting and Signage
- Industrial LED Lighting: Image Recognition Devices
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
