STP16CP05TTR Overview

Save board space with 24-TSSOP (0.173, 4.40mm Width) package. For the design of this LED driver, 16 outputs are used.Surface Mount represents this mounting method.When it emerges as a Linear, it performs extremely well and is highly reliable.It is possible for the led driver ic to function normally at -40°C~125°C TA.In this case, there are 24 terminations.The LED light driver is configured with a base of 0 pins.16 segments exist.On the Surface Mount, a device is mounted.The base part number for this LED driver is STP16C.It is acceptable for the supply voltage to be 5.5V.In addition, it has 24 pins.In addition, its characteristics are classified into Display Drivers.A voltage of 3V is its minimal input voltage.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.Currently, the supply current can only reach 5.5V.With a minimum supply current less than 11.7mA, this device achieves high efficiency.The load is capable of receiving 100mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 30MHz.LED drivers deliver all their benefits with a maximum output current of 100mA.Voltages should not exceed 20V volts at the output.

STP16CP05TTR Features

• Available in the 24-TSSOP (0.173, 4.40mm Width) package

• Operating temperature of -40°C~125°C TA

• Supply voltage of 3.3V

• Switching frequency of 30MHz

STP16CP05TTR Applications

There are a lot of STMicroelectronics STP16CP05TTR LED Driver ICs applications.

• Portable lighting

• Linear fluorescent

• LED backlight driver for LCD displays for portable equipment

• Museum lighting

• Replacement lamps

• General lighting

• Down lights

• Street lighting

• Medical surgery lighting

• Stage Lighting and Signage