STP16CPC26TTR Overview

Board space is saved by its 24-TSSOP (0.173, 4.40mm Width) package.For the design of these LED drivers, 16 outputs are used.Surface Mount is used to mount the led driver.With high reliability and efficiency, this emerges as a Linear.The led light driver can work at -40°C~125°C TA.The benefits it provides to Lighting are considerable.On the basis of the frequency 30MHz, it operates.In this case, there are 24 terminations.It is configured with 24 pins as its base.Under 3V voltage supply, undetermined failures may occur.It is estimated that there are 16 segments.Surface Mount is mounted on it.This LED driver can be found under the base part number STP16C.An acceptable maximum value for the supply voltage is 5.5V.The output voltage is 20V.Depending on its characteristics, it is classified into Display Drivers.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.Whenever the supply current is lower than 15.3mA, it can provide high efficiency.In this case, the load can only be supplied with 90mA current.It is necessary to have 5V voltages inside systems to power them.

STP16CPC26TTR Features

Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
Operating with the supply voltage of 5V

STP16CPC26TTR Applications

There are a lot of STMicroelectronics STP16CPC26TTR LED Driver ICs applications.

• Other Electronic Devices
• Stage and Studio lighting
• LED Lighting PFCs, Linear Dimmable
• Down lights
• Auxiliary lights for on-vehicle cameras
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Medical surgery lighting
• Sports Facility Lighting
• LED backlight driver for LCD displays for portable equipment
• Portable lighting