STP16DPPS05PTR Overview

There is also a 24-SSOP (0.154, 3.90mm Width) package that is used to save space on the board. In LED drivers, the outputs are all set to 16.In order to mount the led light driver, Surface Mount is used.It emergys as a Linear with high efficiency and reliable performance.This LED driver can be operated at a temperature of -40°C~125°C TA. The frequency of 30MHz is used as the basis for its operation.For its operation, terminations with a value of 0 are used.It is configured with 24 pins as its base.Undetermined failures will occur if the voltage supply is less than 3V.The number of segments is estimated to be 16.There is a device mounted on the Surface Mount.The LED driver can be found under the base part number STP16D.The supply voltage of 5.5V is an acceptable maximum value.There is 20V voltage output from the device.The device has a pin count of 24.Furthermore, it can be categorized as Display Drivers based on its characteristics.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.There is no current that can be supplied to the load.

STP16DPPS05PTR Features

Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V

STP16DPPS05PTR Applications

There are a lot of STMicroelectronics STP16DPPS05PTR LED Driver ICs applications.

• Constant Voltage Power Source for portable equipment
• LED backlight driver for LCD displays for Tablets and Note PCs
• A- lamps
• Gallery lighting
• Linear fluorescent
• Dimmable LED for vehicle interiors
• LED headlights
• Amusement Machines
• Panel lighting
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights