TDA7264A Overview

In the Multiwatt-11 (Vertical, Bent and Staggered Leads) package, it is embedded.In this case, it is packaged as Tube .In addition, there are 11 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 2-Channel (Stereo) is used as the output.This electrical device is classified as type Class AB .As part of a signal interface in a computer or other communication device, there are 11 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Through Hole .There is ±5V~22.5V voltage supply to this electrical device.2 channels are available on the device.Operating with Depop, Mute, Short-Circuit and Thermal Protection, Standby is possible.Temperatures should not exceed 0°C~70°C TA .There are 11 pins on this device.Amp parts belongs to the TDA7264 family.In this case, the electronic part is mounted in the way of Through Hole .According to the manufacturer, the maximum output power of this electronic component is 25W kWh per hour.Amp parts is a Dual supply type.Power is supplied by a +-20V volt source.Supply currents are limited to 130mA .

TDA7264A Features

Multiwatt-11 (Vertical, Bent and Staggered Leads) package
11 pin count
TDA7264 family
25W kWh per hour

TDA7264A Applications

There are a lot of STMicroelectronics
TDA7264A audio amplifiers applications.

• single/dual op amp sum and difference circuits
• Integrator and differentiator circuits
• Logarithmic and exponential operation circuits
• Multiplication and division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering