TDA7297SA Overview

In Clipwatt-15 (Vertical, Bent and Staggered Leads) is embedded this device.Chips should be packaged in Tube cases.Transmission lines can be terminated with 15 terminations, which have devices that match the line's characteristic impedance.2-Channel (Stereo) is used for its output.In this case, it is an electrical device of type Class AB .15 pins are pronged contacts on a computer or other communication device that form a signal interface.The electronic part is positioned in the way of Through Hole .This electrical device has a 6.5V~18V supply voltage.Currently, the device has only 2 channels.Amp parts is possible to operate wAmp partsh Mute, Short-Circuit and Thermal Protection, Standby .No temperature higher than 0°C~70°C TA should be used for operations.This device has 15 pins.Amp parts is part of the TDA7297 family.Its recommended mounting way belongs to Through Hole .As of this moment, the maximum Output Power of this electronic part is 10W kWh per hour.Amp parts is important to keep the supply voltage (Vsup) above 6.5V so that the device functions normally.Vsup reaches 18V at the maximum.In this electronic part, the supply type is Single .Amp parts is powered by a 13V volt power supply.Supply current reaches 65mA at its maximum.

TDA7297SA Features

Clipwatt-15 (Vertical, Bent and Staggered Leads) package
15 pin count
TDA7297 family
10W kWh per hour

TDA7297SA Applications

There are a lot of STMicroelectronics
TDA7297SA audio amplifiers applications.

• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation
• Video and image computer boards
• Medical instruments
• Television broadcasting equipment
• Displayers for aircraft and air transportation control systems