TL062CN Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp of this type is a J-FET-type. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 15mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, this op amp functions well at 0°C~70°C. An 200μA volt supply current is needed for this linear amplifier to operate. 75.56dB should be the voltage gain. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 18V.
TL062CN Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
TL062CN Applications
There are a lot of STMicroelectronics TL062CN Instrumentational OP Amps applications.
- Oscilloscopes
- Power control
- Signal amplification
- Proportional counter tubes
- Ultrasound transducers
- Switching amplifier
- Laptop
- Signal filtering
- Non-polarized electrodes
- Radiation thermometry transducers
