40mA per Channel 20pA 86 dB Instrumentational OP Amps 6V~36V ±3V~18V TL072 8 Pins 8-DIP (0.300, 7.62mm)
SOT-23
TL072BCN Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
8-DIP (0.300, 7.62mm)
Operating Temperature
0°C~70°C
Packaging
Tube
JESD-609 Code
e3
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn)
Subcategory
Operational Amplifier
Technology
BIPOLAR
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
2
Supply Voltage
15V
Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
TL072
Pin Count
8
JESD-30 Code
R-PDIP-T8
Qualification Status
Not Qualified
Power Supplies
+-15V
Number of Circuits
2
Operating Supply Current
1.4mA
Slew Rate
16V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
J-FET
Common Mode Rejection Ratio
86 dB
Current - Input Bias
20pA
Voltage - Supply, Single/Dual (±)
6V~36V ±3V~18V
Output Current per Channel
40mA
Input Offset Voltage (Vos)
1mV
Gain Bandwidth Product
4MHz
Neg Supply Voltage-Nom (Vsup)
-15V
Unity Gain BW-Nom
4000 kHz
Low-Offset
NO
Frequency Compensation
YES
Supply Voltage Limit-Max
18V
Low-Bias
YES
Neg Supply Voltage-Max (Vsup)
-18V
Input Offset Current-Max (IIO)
0.004μA
Height Seated (Max)
5.33mm
RoHS Status
ROHS3 Compliant
TL072BCN Product Details
TL072BCN Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the J-FET-type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 15V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. For this electrical component, Through Hole is the recommended mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 1.4mA , this buffer op amp will be able to operate. The buffer amp consists of 2 circuits in total.
TL072BCN Features
8 Pins supply voltage of 15V
TL072BCN Applications
There are a lot of STMicroelectronics TL072BCN Instrumentational OP Amps applications.