TS331IQT Overview

The product is packaged in 6-UFDFN in order to facilitate transportation.Output type of this comparator is Open Drain .The part is shipped by Cut Tape (CT) .The comparator has 6 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .This is a typical comparator of type General Purpose .Currently, it consists of only 1 elements.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.6 pins are available on the comparator.In order to find a solution that meets your specific needs, search TS331 for more pin-to-pin solutions.A quiescent current of 26μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 29μA .An excess of current supply over 29μA could result in malfunction of the comparator.You are allowed to input a maximum current of 400nA into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.

TS331IQT Features

Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB

TS331IQT Applications

There are a lot of STMicroelectronics
TS331IQT linear comparators applications.

• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices