TS3704IDT Overview

To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull output on this device.The chip is packaged with Cut Tape (CT) .The device is designed with 14 terminations.The chip belongs to Comparator .A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .This comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TS3704 .A quiescent current of 25μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 80μA supply current.If the current supply exceeds 25μA , the comparator might be damaged.This device requires 5V power supplies to operate.Input current to the device cannot exceed 1pA .

TS3704IDT Features

CMOS, Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA

TS3704IDT Applications

There are a lot of STMicroelectronics
TS3704IDT linear comparators applications.

• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications
• Limit Comparators