TS3704IN Overview
The product is packaged in 14-DIP (0.300, 7.62mm) in order to facilitate transportation.Output type of this comparator is CMOS, Push-Pull .The part is shipped by Tube .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .This is a typical comparator of type General Purpose .Currently, it consists of only 4 elements.The device includes 14 pins.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.14 pins are available on the comparator.In order to find a solution that meets your specific needs, search TS3704 for more pin-to-pin solutions.A quiescent current of 25μA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 25μA .An excess of current supply over 25μA could result in malfunction of the comparator.A power supply of 5V is sufficient for the operation of the device.You are allowed to input a maximum current of 1pA into the device.
TS3704IN Features
CMOS, Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS3704IN Applications
There are a lot of STMicroelectronics
TS3704IN linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
