TS372CN Overview

In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.We ship the part through Tube .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as Differential .A total of 2 elements can be found in it.A total of 8 pins are included.A Through Hole mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for TS372 to find more pin-to-pin solutions for your specific needs.There is 375μA current flowing in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 375μA .A current supply greater than 375μA may cause the comparator to malfunction.The device can be run with 5V power supplies.

TS372CN Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 375μA

TS372CN Applications

There are a lot of STMicroelectronics
TS372CN linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications