TS944IPT Overview

In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. A total of 14 pins are attached to buffer op amp. Please take in mind that op amp should be run at 3V. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are available on the instrumentation amplifier. Op amp rates 10mV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 1.2μA can be used to operate this linear amplifier. There should be no change in the voltage gain. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The linear amplifier consists of 4 different elements in total. It is used TAPE AND REEL to pack the op amps.

TS944IPT Features

14 Pins
supply voltage of 3V
100dB voltage gain
Output Type: Rail-to-Rail

TS944IPT Applications

There are a lot of STMicroelectronics TS944IPT Instrumentational OP Amps applications.

• Power generator
• Differentiator circuits
• Commercial audio systems
• Band-pass filter
• Measurements of Wheatstone bridge
• Scintillation detectors
• Integrator circuits
• Signal amplification
• Navigation
• Weak signal detection