Name: VND3NV04-E
Brand: STMicroelectronics
SKU: VND3NV04-E
Availability: InStock

new-10%

VND3NV04-E

Manufacturer part number:VND3NV04-E

Manufacturer:STMicroelectronics

Description:N-Channel 2.28mm PMIC OMNIFET II?, VIPower? Series VND3N 3 Pin TO-252-3, DPak (2 Leads + Tab), SC-63

Case Package:SOT-23

Datasheet:VND3NV04-E Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-252-3, DPak (2 Leads + Tab), SC-63
Number of Pins	3
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Series	OMNIFET II™, VIPower™
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	2
ECCN Code	EAR99
Resistance	120mOhm
Terminal Finish	Tin (Sn)
Max Power Dissipation	35W
Terminal Position	SINGLE
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Terminal Pitch	2.28mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	VND3N
Pin Count	3
JESD-30 Code	R-PSSO-G2
Number of Outputs	1
Output Type	N-Channel
Max Output Current	5A
Interface	On/Off
Nominal Supply Current	100μA
Output Configuration	Low Side
Power Dissipation	35W
Output Current	3.5A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	100μA
Input Type	Non-Inverting
Switch Type	General Purpose
Continuous Drain Current (ID)	3.5A
Ratio - Input:Output	1:1
Voltage - Load	36V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	40V
Output Peak Current Limit-Nom	5A
Rds On (Typ)	120m Ω (Max)
Drain to Source Resistance	120mOhm
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Length	6.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

VND3NV04-E Product Details

VND3NV04-E Overview

It's?packaged?in?the way?of?a?Tube.In the TO-252-3, DPak (2 Leads + Tab), SC-63 package, it is included.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the VND3N family.It has a total of 2 terminations.During operation, the 3 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 5A to meet the operation criteria.Surface Mount is mounted in the way.This LED driver is equipped with a total of 3 pins.In this case, there is 120mOhm resistance in the LED driving board.It belongs to the OMNIFET II?, VIPower? series.The output current is set to 3.5A in this case.It has a maximum current requirement of 100μA.