Name: VND5N07-1
Brand: STMicroelectronics
SKU: VND5N07-1
Availability: InStock

new-10%

VND5N07-1

Manufacturer part number:VND5N07-1

Manufacturer:STMicroelectronics

Description:N-Channel 2.25mm PMIC OMNIFET II?, VIPower? Series VND5N07 3 Pin TO-251-3 Short Leads, IPak, TO-251AA

Case Package:SOT-23

Datasheet:VND5N07-1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	TO-251-3 Short Leads, IPak, TO-251AA
Number of Pins	3
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Series	OMNIFET II™, VIPower™
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	3
ECCN Code	EAR99
Resistance	200mOhm
Terminal Finish	Tin/Lead (Sn/Pb)
Max Power Dissipation	60W
Technology	MOS
Terminal Position	SINGLE
Number of Functions	1
Terminal Pitch	2.25mm
Base Part Number	VND5N07
Pin Count	3
Number of Outputs	1
Output Type	N-Channel
Max Output Current	5A
Interface	On/Off
Current - Output (Max)	3.5A
Nominal Supply Current	250μA
Output Configuration	Low Side
Power Dissipation	60W
Output Current	5A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Output Characteristics	OPEN-DRAIN
Continuous Drain Current (ID)	5A
Output Polarity	TRUE
Ratio - Input:Output	1:1
Input Characteristics	SCHMITT TRIGGER
Voltage - Load	55V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	70V
Turn On Time	0.25 µs
Output Peak Current Limit-Nom	5A
Rds On (Typ)	200m Ω (Max)
Drain to Source Resistance	200mOhm
Turn Off Time	5 µs
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height Seated (Max)	7.4mm
Length	6.5mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

VND5N07-1 Product Details

VND5N07-1 Overview

The LED driver's packaged as a Tube.The TO-251-3 Short Leads, IPak, TO-251AA package contains it.This LED driving board is mounted using the mounting type Through Hole.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of VND5N07.It contains 3 terminations.The operation is performed through the 3 pins.It consists of 1 functions.The LED driver output is limited to 3.5AV.This operation requires the maximum output current to be decreased to 5A.The lighting driver is mounted in the direction of Through Hole.It is equipped with a total of 3 pins.Lighting drivers with 200mOhm resistance are used.It is included in the OMNIFET II?, VIPower? series.The output current is set to 5A in this case.