4214AP Overview

In order to package it, Tube are used.Consequently, it is embedded in the 14-CDIP (0.300, 7.62mm) package to ensure cost-effectiveness.In most cases, there are 4-Quadrant bits per stage.A voltage of 15V is used as the supply voltage for this device.-15V is supplied with a nominal negative supply voltage.During the period of 10MHz, a modulated radio-frequency signal occupying the frequency range is present.To prevent signals from reflecting off the end of the transmission line, there are 14 terminations.Electronic parts with a number of similarities can be found under its base part number 4214.Electronics that fall under the subcategory Analog Computational Functions are included in this device.For mounting on the PCB, Through Hole is used.Reflow temperature limit NOT SPECIFIED is determined by the component with the lowest temperature tolerance.The type of IC ANALOG MULTIPLIER OR DIVIDER is analog.In this case, the maximum operating temperature is 85°C.In order to maintain normal operation, the maximum supply voltage is set at 20V.Keeping the operating temperature below -25°C is the maximum permissible.

4214AP Features

Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 10MHz

4214AP Applications

There are a lot of Texas Instruments 4214AP Analog Multipliers & Dividers applications.

• Displayers for aircraft and air transportation control systems
• Instrumentation
• E-book readers
• Communication device
• Active probe
• High gain DC amplifier
• single/dual op amp sum and difference circuits
• Proportional operation circuits
• Video and image computer boards
• Computer workstations and wireless base stations