5962-0051206QHA Overview
An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 10 terminations this year. A total of 10 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 10 pins. Op amp ic rates 1.5mV for input offset voltage. There should be no change in the voltage gain at 109dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. An buffer amplifier is packed in a TUBE-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 6V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 3V volts.
5962-0051206QHA Features
10 Pins
supply voltage of 3V
109dB voltage gain
5962-0051206QHA Applications
There are a lot of Texas Instruments
5962-0051206QHA Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
