Welcome to Hotenda.com Online Store!

logo
userjoin
Home

5962-9080703QPA

5962-9080703QPA

5962-9080703QPA

Texas Instruments

1 Channels 30nA 65 dB Instrumentational OP Amps 0.03μA 8 Pins CDIP

SOT-23

5962-9080703QPA Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact PlatingLead, Tin
Package / Case CDIP
Surface MountNO
Number of Pins 8
PackagingRail/Tube
Number of Terminations 8
ECCN Code EAR99
Max Operating Temperature125°C
Min Operating Temperature -55°C
Subcategory Operational Amplifier
Technology BIFET
Terminal Position DUAL
Terminal FormTHROUGH-HOLE
Number of Functions 1
Supply Voltage 5V
Terminal Pitch2.54mm
Pin Count8
Qualification StatusQualified
Temperature GradeMILITARY
Number of Channels 1
Max Supply Voltage18V
Supply Current-Max 0.375mA
Slew Rate3.4 V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 65 dB
Current - Input Bias 30nA
Input Offset Voltage (Vos) 1.9mV
Gain Bandwidth Product1.8MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 1300 kHz
Voltage Gain 93.06dB
Average Bias Current-Max (IIB) 0.03μA
Low-Offset NO
Frequency CompensationYES
Max Dual Supply Voltage18V
Low-Bias YES
MicropowerYES
Min Dual Supply Voltage 3.5V
Bias Current-Max (IIB) @25C 0.04μA
Programmable PowerNO
Nominal Gain Bandwidth Product 2MHz
Max I/O Voltage 1.9mV
Wideband NO
Power NO
Input Offset Current-Max (IIO) 0.02μA
Height 5.08mm
Length 9.6mm
Width 6.67mm
Thickness 4.57mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Contains Lead
In-Stock:3546 items

5962-9080703QPA Product Details

5962-9080703QPA Overview


Packaged in a CDIP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Rail/Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1.9mV for this buffer op amp. 93.06dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -55°C degrees Celsius. No temperature greater than 125°C should be used. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 18V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts.

5962-9080703QPA Features


8 Pins
supply voltage of 5V
93.06dB voltage gain


5962-9080703QPA Applications


There are a lot of Texas Instruments
5962-9080703QPA Instrumentational OP Amps applications.


  • Integrator circuits
  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection

Get Subscriber

Enter Your Email Address, Get the Latest News