5962-9088101MPA Overview

The linear amplifier is packaged in a CDIP case which makes it easy for the consumer to handle. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. It comes in a Rail/Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 600μV. Op amp is a member of the 123.52dB's 123.52dB family. Instrumentation amplifier has 1 channels on it. Using this buffer op amp requires a temperature of at least -55°C. It is recommended that op amp be used at temperatures below 125°C. With regard tp supply voltage, op amp is used under 40V. The linear amplifier's supply voltage should be higher than 4V. There should be a dual supply voltage of 20V for you to conduct this electrical part.

5962-9088101MPA Features

8 Pins
supply voltage of 15V
123.52dB voltage gain

5962-9088101MPA Applications

There are a lot of Texas Instruments
5962-9088101MPA Instrumentational OP Amps applications.

• Proportional operation circuits
• Inverse/same-phase proportional circuit
• Addition operation circuits
• Subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits