5962-9096901M2A Overview
An op amp of this type is a COMPARATOR-type. It is estimated that there will be at least 20 terminations this year. A total of 20 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Comparator op amp ic can be identified by the fact that this is a type of Comparator device. In total, the buffer amplifier consists of 20 pins. Op amp ic rates 5mV for input offset voltage. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs PUSH-PULL signals. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. The operating supply voltage of the buffer op amp is rated at 5V. An buffer amplifier is packed in a TUBE-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 16V, which is suitable. Keeping the linear amplifier's supply voltage above 4V is recommended.
5962-9096901M2A Features
20 Pins
supply voltage of 5V
Output Type: PUSH-PULL
5962-9096901M2A Applications
There are a lot of Texas Instruments
5962-9096901M2A Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
