74AC11898N Overview

The device is embedded in PDIP package. This chip has a total termination count of 20. Parts with a 5V operating supply voltage are specified. An electronic component is included in the AC. There are also the following additional considerations in this section: CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE. There should be no less than 3V supply voltage (Vsup) for this part. There is a possibility of delivering voltage at 3.3/5V. This part requires a maximum supply voltage (Vsup) of 5.5V. A total of 10 bits are present on an IC chip. 20 pins are on it. Shift Registers is its subcategory. Temperatures above 85°C must be avoided.

74AC11898N Features

It supplies 3.3/5V power

74AC11898N Applications

There are a lot of Texas Instruments 74AC11898N Shift Registers applications.

• Pattern Recognizers
• Remote control holding register
• ROM Chips
• Flash Memory
• Pseudo Random Pattern Generator
• 8-bit data storage
• Delay Line
• Output expansion
• data manipulation
• Generate time delay toward digital circuits