74ACT16543DLG4 Overview

Logical driver uses a neat SSOP package. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the ACT family of parts. 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 16 bits are included within the electrical component. Logical driver features INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct -24mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a REGISTERED BUS TRANSCEIVER logic IC. The fundamental operation of logical driver is based on 2 circuits.

74ACT16543DLG4 Features

Bus Driver/Transceivers
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
High Level Output: 24mA
Low Level Output: -24mA
REGISTERED BUS TRANSCEIVER Logic IC

74ACT16543DLG4 Applications

There are a lot of Texas Instruments 74ACT16543DLG4 Buffers & Transceivers applications.

• Structural bonding
• Switching system
• 1x/2x Fiber Channel
• Low power, low voltage systems
• Cable network front end
• Fiber-to-the-desktop
• Vehicle, ship, aircraft navigation and positioning
• WDM transmission
• interconnection between switches
• SONET/SDH Network