74ACT16825DLG4 Overview

This package uses SSOP. It is necessary to use all 2 elements. Thebuffer features 56 terminations that serve different purposes. 5V is the required supply voltageThis buffer driver is part of the ACT family of parts. With the electrical component, 56 pins are set. This logical driver is suitable for Surface Mount different applications. In total, it has 56 pins. The transceiver features 2 ports for enhanced functionality. Each element uses 9 bits. Bus Driver/Transceiverss are specifically types of them. During quiescent state, the electronic part uses 8μA. The recommended power supply is 5V. Users are advised to apply 5V supply voltage to the electronic part for the part to operate safely and reliably. With WITH DUAL OUTPUT ENABLE, you can better serve your customers. A temperature as low as -40°C can be tolerated by this buffer. There should be no more than 85°C ambient temperature for the logical driver to operate. As a low-level output mode, it produces 24mA. During high-level output, the electronic part may conduct -24mA. At least 4.5V should be used in order to run this automotive buffer on a continuous basis. Approximately 5.5V are the maximum supply voltages. There is an bus transceiver called a BUS DRIVER logic chip. This is sufficient to produce 18 outputs from it. Buffer ICs are controlled by ENABLE LOW control technology during startup.

74ACT16825DLG4 Features

Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
High Level Output: 24mA
Low Level Output: -24mA
BUS DRIVER Logic IC

74ACT16825DLG4 Applications

There are a lot of Texas Instruments
74ACT16825DLG4 Buffers & Transceivers applications.

• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio
• Clock radio
• Tuner
• Portable radio
• Car radio
• Satellite radio receiver