74ACT16841DLG4 Overview

In the package 56-BSSOP (0.295, 7.50mm Width), it can be found. As a result, it has a packaging of Tube. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. The 74ACT series of FPGAs is the one this FPGA belongs to. Electronic parts with 10 bits are designed for this application. In this device, there are 56 terminations that have been designed. This type belongs to the 74ACT16841 family. The device is operated when the supply voltage is set to 5V. The device is equipped with 56 pins. ACT is the family name of this electronic device. 56 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. Electronic circuits are represented by 20 input lines. With an output current of 24mA, it is highly flexible in terms of design. The supply voltage should be maintained at 5V for high efficiency. Without external influences, it consumes 8μA quiescent current. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.08mA is needed for operation.

74ACT16841DLG4 Features

56-BSSOP (0.295, 7.50mm Width) package
74ACT series
10 Bits
74ACT16841 family
56 pin count
56 pins
5V power supplies

74ACT16841DLG4 Applications

There are a lot of Texas Instruments 74ACT16841DLG4 Latches applications.

• Stacked or Push-Down Registers
• Instrumentation
• Automotive HEV/EV Powertrain
• Shift right register
• Automatic test equipment
• Up/down difference counting
• Shift register
• Phase comparator
• Control circuits
• A/D and D/A conversion