9 Bit Universal Bus Exchanger 3.3V -40°C~85°C Universal Bus Functions 74ALVCHR Series 74ALVCHR16409 56 Pin 0.635mm 1.8V 56-BSSOP (0.295, 7.50mm Width)
SOT-23
74ALVCHR16409LRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
56-BSSOP (0.295, 7.50mm Width)
Number of Pins
56
Weight
694.790113mg
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
Series
74ALVCHR
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
56
Voltage - Supply
1.65V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Number of Functions
1
Supply Voltage
1.8V
Terminal Pitch
0.635mm
Base Part Number
74ALVCHR16409
Pin Count
56
Number of Outputs
18
Number of Elements
1
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
3.6V
Power Supplies
3.3V
Number of Circuits
9-Bit, 4-Port
Number of Ports
4
Number of Bits
9
Propagation Delay
6.2 ns
Quiescent Current
40μA
Turn On Delay Time
7.8 ns
Family
ALVC/VCX/A
Output Characteristics
3-STATE WITH SERIES RESISTOR
Current - Output High, Low
12mA 12mA
Logic Type
Universal Bus Exchanger
Height Seated (Max)
2.79mm
Width
7.49mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
74ALVCHR16409LRG4 Product Details
74ALVCHR16409LRG4 Overview
There is an embedded version of it in the 56-BSSOP (0.295, 7.50mm Width) package. In this case, it is packaged in the same way as Tape & Reel (TR). The superior flexibility of this circuit is achieved through the use of 9-Bit, 4-Port circuits. There is a logic type Universal Bus Exchanger associated with this electrical device. It is mounted in the way of Surface Mount so that this electronic part can be seen. It is better to have an operating temperature higher than -40°C~85°C. In order to ensure maximum design flexibility, it features a High/Low output current of 12mA 12mA. It is a type of FPGA that belongs to the 74ALVCHR series of FPGAs. It operates at a voltage of 1.65V~3.6V. It is a member of the 74ALVCHR16409 family. There are a number of termination types, including 56 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. In order to maintain normal operation of the device, the supply voltage should remain above 1.8V. The 56 pin count is provided. 9 Bits were used in the design of this electronic part. The 4 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. Mounted in the way of Surface Mount is this electronic part. 56 pins are used in the design. It is a member of the ALVC/VCX/A family of electronic devices. Upon reaching 3.6V, the supply voltage (Vsup) reaches its maximum value. The power source is 3.3V. The element consists of 1 elements in total. It is in this case that 40μA of quiescent current is consumed without being affected by external factors in any way. 18 outputs are configured.
74ALVCHR16409LRG4 Features
56-BSSOP (0.295, 7.50mm Width) package 74ALVCHR series 74ALVCHR16409 family 56 pin count 56 pins 3.3V power supplies 1 elements 18 outputs
74ALVCHR16409LRG4 Applications
There are a lot of Texas Instruments 74ALVCHR16409LRG4 Universal Bus Functions applications.